Has anyone ever worked on this type of ice machine? There is very little support and getting correct wiring diagrams are tough. The manufacturer sent me all of the electrical info and none of the diagrams are correct. We have serviced this machine going on 3 years now and have kept it running until now. I will post pics if possible but the unit shows that the bin is full and has shut down. The bin full device is a bindicator brand with the motorized vane that turns until it’s torqued then closes a microswitch. It has been replaced, and the circuit, bin full relay all check fine. All safety switches are good but I don’t know much about the plc control. These units are rare but I hope someone on here has had experience with them or maybe worked for the manufacture previously that can give some advice. Thanks in advance.
Morris & Associates Ice machine issue
carman
21 - 25 of 25 Posts
Joined
·
10,209 Posts
I made just 1 phone call and the Service Manual is being emailed to me as I type. 1-919-582-9200-x2 and I spoke to a wonderful North Carolinian named Maranda. How this helps
Joined
·
149 Posts
A factory Vogt is complicated enough. We've got one made in the 80's that was "remanufactured" by someone other than Vogt. What a mess. Took a lot of calls to some old timers at Vogt to get it straight. Still isn't perfect...Turbos were way better if you want industrial level production.
21 - 25 of 25 Posts
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
