[chiller32]

Or maybe the time of the month.

I wonder what ever happened to the guy with the suspect o-rings.

Its my time of the month and YOUR the pad

 

[heatingman]

Nice way to teach people how to rip off the factory. Your a regular thief! Its replies like this that prove my point about not giving out info to people not trained. Your teaching people how to NOT take responiblity for their actions and instead make the factory pay for their mistakes!

Hey chiller32, you misunderstood my post, and I'm sorry for that. I dont give info any more than you do. I was saying that IF THEY HANDED OUT MANUALS THE SCENERIO I DESCRIBED WOULD OCCUR.

 

[sabre11134]

Well since you want to make it personal. Only a Retard would come to this forum to get information on how to repair or troubleshoot a chiller. First off anybody on this web fourm requesting Copyrighted material from another member could get both parites and the fourm host in alot of trouble if any one wanted to make a real stink. Second your customer probably thinks your an "expert chiller tech". I would love to here how you came up with the unit only has oil return problems "from 85 to 100 capacity". I also seen in one of your replys that if the chiller crash and because you can't get the rebuild manual your going to sell the customer a new chiller. Nice that employer you work for! won't spend the money to train you properly instead you two are going to rip off a customer and sell them a new chiller they may not need all becuase YOU can't overhaul the compressor.

chiller 32 look at your response, you will find nothing more than anger in your writing. You think everbody is a retard. The company i work for will not employ people like you with your i am better than every person on this earth. I bet you are a maint man in real life.

 

[emcoasthvacr]

Yep

I was where your were at 30 years ago, but making more money.

Actually i'm a tool monkey like you.

I'd just like to see you criticize other people's comments in a more neutral tone.

I'm sure if I had your attitude, I would still be a tool monkey.

In addition, neither your son or you are licensed in HVACR or Engineering like I am -- you're a dependant employee with little or no education right?

Not so sure everyone makes a good chiller. I just did HVACR maintenance back in the 70's and now I'm a mechanical engineer. Taking pressure, temperature, pumping, vacuuming R-12 chillers was anything a monkey could do(it's kinda of funny -- I did the same measurement testing in engineering school....lol). You don't need licensing to work under the umbrella of a Fortune 500 company -- in fact, I got paid a lot more for being a monkey maintenance man for a Fortune 500 company, than being a service rep for Carrier, York, Trane, etc.

Even today, Carrier (a small division of United Technologies), former York, & Trane, and ASHRAE are plebian corporate entities. Johnson Controls(who is nothing more than a subcontractor to Fortune 50 companies, is small potatoes.

As a top engineer, I only got offers from GE, General Motors, Siemens, & NASA, in engineering mgmt (For instance, I can prove I was offered an engineering mgmt position with the largest corporation in the world) -- the players in the HVACR industry never had a prayer to recruit top talent, and probably never will.

Hopefully that will change.

And honestly, if I put my mind to it, I would run circles over the both of you (might take me longer to diagnose & fix) -- Do the both of you have any Fortune 500 experience as a HVACR technician? Do you have an Associate in Applied Science? are you a Mechanical Engineer?





You think becuase you were a maintenance man for a fortune 500 company and the fact that you have an Associate degree that you can run circles around people on this forum! well You just won the prize for Dumbass of the year! I have never herd anybody on this forum brag as hard as you just did. Un freakin real ! <--- college boy thinks hes smart
LOLOLOLOLOLOLOLOLOLOLOLOLOLOLOL <--- My 19 year old son in HVAC trades school is smarter then YOU! He at lest knows when to keep his pie hole shut!

 

[mrmarmal]

What a bunch of sissies...

Hey guys, I 'm new here, and to the hvac field. I was hoping to learn interesting things from the experts on this site, but all I learned was that after years of technical training, most of you still can't spell, use proper punctuation, or grasp the concept of quotation. I also noticed that several of you have the demeanor of some of the local "retards" I have worked with in the past.
Now I don't claim to be a great speller(or a great anything for that matter), but if I was on here pulling the old holier than thou routine, and pretending to know more than is humanly possible about simple machinery, I would be damn sure to at least hit the old spell checker, just to insure that all the folks I am trying to BS, can take me seriously, because if you can't spell, or don't know the difference between "here and hear" or can't follow a thread long enough to know who said what, I can not take you seriously no matter how much smoke you puff.
Techs? I think not. Retards? I think so
Guess I'll have to spend more time with my dad, who by the way, knows more about everything, than all of you wannabe techs combined.
You give this place a bad name, I feel bad for the sponsors, I bet they would break their contracts if they read this thread.
Fools...

 

[chiller32]

Hey chiller32, you misunderstood my post, and I'm sorry for that. I dont give info any more than you do. I was saying that IF THEY HANDED OUT MANUALS THE SCENERIO I DESCRIBED WOULD OCCUR.

I am sorry for my mistake!

 

[chiller32]

chiller 32 look at your response, you will find nothing more than anger in your writing. You think everbody is a retard. The company i work for will not employ people like you with your i am better than every person on this earth. I bet you are a maint man in real life.

you did not really reply to my post you just changed the point nice way to avoid the true. As for working for your company they already have enough retards without me

 

[chiller32]

Hey guys, I 'm new here, and to the hvac field. I was hoping to learn interesting things from the experts on this site, but all I learned was that after years of technical training, most of you still can't spell, use proper punctuation, or grasp the concept of quotation. I also noticed that several of you have the demeanor of some of the local "retards" I have worked with in the past.
Now I don't claim to be a great speller(or a great anything for that matter), but if I was on here pulling the old holier than thou routine, and pretending to know more than is humanly possible about simple machinery, I would be damn sure to at least hit the old spell checker, just to insure that all the folks I am trying to BS, can take me seriously, because if you can't spell, or don't know the difference between "here and hear" or can't follow a thread long enough to know who said what, I can not take you seriously no matter how much smoke you puff.
Techs? I think not. Retards? I think so
Guess I'll have to spend more time with my dad, who by the way, knows more about everything, than all of you wannabe techs combined.
You give this place a bad name, I feel bad for the sponsors, I bet they would break their contracts if they read this thread.
Fools...

listen young man before you post to a thread think about what your saying try not to act like a kid that thinks his father is the best thing ever. There are many a tech here ( spelling or not ) that would make YOUR dad look like a fool so don't hold him to a standard that he can not meet.

 

[mrmarmal]

Chiller, did you hear the term "retard" for the first time today? You throw the word around like a third grader. Here is a fresh one for you to take to work tomorrow. Ready? Fart face. There you go son, impress you friends with that little gem. Go on boy use it up. Go on. Remember who told you that one. I got more. Here is one that will get the milk flowing out the snot holes. Ready? Boogie. Say it loud boy and hope the nobody important can figure out which of the brats said it. Go on boy whooh hoo boy here we go now! I got more... Ever hear of a boobie? You will like those someday. How about a dingleberry? Go ahead, you can have that one too. Tell your friends uncle Marc taught you a few new ones. Don't play out the old retard, bring something new to the table. Show them you have a pair, boy.
Retard? Is that all you got boy?
I am going back to sleep now, yall are a bore. Yawn...

 

[heatingman]

I am sorry for my mistake!

Apology accepted.

 

[chiller32]

I was where your were at 30 years ago, but making more money.

Actually i'm a tool monkey like you.

I'd just like to see you criticize other people's comments in a more neutral tone.

I'm sure if I had your attitude, I would still be a tool monkey.

In addition, neither your son or you are licensed in HVACR or Engineering like I am -- you're a dependant employee with little or no education right?




Your not a tool monkey your just a tool! as for little or no education again your a stupid half wit! most if not all of the Tech's here have way more education then any 2 or 4 year college grad will ever have. You just point out how little knowledge you have when its comes to HVAC techs. All of the good tech's go to school every year upgrading their education so a long term Chiller tech might have 30 plus years of trainning aside from field work. Your silly ass 2 or 4 year degree can't even come close. Go back to college for the
next 10 years and you might be able to hang with my son! sounds like it will take you that long to learn to shut your pie hole! I could be wrong it might take you longer!

 

[mrmarmal]

Chiller, you obviously don't know squat about squat. like I said, my dad knows more about anything, than you will ever know(or more likely, pretend to know), in this field or any other.
Is that all you have old man?

 

[mrmarmal]

I see what he (chilly) is learning at his factory training. Pie hole... I said that like 15 years ago. The real shame is he was allowed to reproduce. That boy of his is probably a real gem. Bet he runs around with the finest retards. With any luck, he is the mail mans.

 

[heatingman]

Marmal, just go to bed already , your insults are meaningless.

 

[mrmarmal]

I am sorry. I just got on a roll, and thought it was funny. You are right though, I have become what I originaly was against, a big bully.
I hope chiller learns from my wicked ways and changes his attitude before it is too late.
In all seriuoseness, can't we all just get along? And leave the repairs to qualified folks like my dad and me?

 

[Randy S.]

Must be the sunspots, then...

I wonder what ever happened with the PEH and the suspect o-ring.

 

[absrbrtek]

Geeze, get over yourself. Why do you condesend in with the low lifes. A person with your stature and education surely wouldn't want to be seen here with the low life "technicians". Now go crawl back under your rock!!

Not so sure everyone makes a good chiller. I just did HVACR maintenance back in the 70's and now I'm a mechanical engineer. Taking pressure, temperature, pumping, vacuuming R-12 chillers was anything a monkey could do(it's kinda of funny -- I did the same measurement testing in engineering school....lol). You don't need licensing to work under the umbrella of a Fortune 500 company -- in fact, I got paid a lot more for being a monkey maintenance man for a Fortune 500 company, than being a service rep for Carrier, York, Trane, etc.

Even today, Carrier (a small division of United Technologies), former York, & Trane, and ASHRAE are plebian corporate entities. Johnson Controls(who is nothing more than a subcontractor to Fortune 50 companies, is small potatoes.

As a top engineer, I only got offers from GE, General Motors, Siemens, & NASA, in engineering mgmt (For instance, I can prove I was offered an engineering mgmt position with the largest corporation in the world) -- the players in the HVACR industry never had a prayer to recruit top talent, and probably never will.

Hopefully that will change.

And honestly, if I put my mind to it, I would run circles over the both of you (might take me longer to diagnose & fix) -- Do the both of you have any Fortune 500 experience as a HVACR technician? Do you have an Associate in Applied Science? are you a Mechanical Engineer?

 

[emcoasthvacr]

Cuz i'm like you guys....lol

Hey -- I'm a tool monkey too with feelings...lol.

Once a technician, always a technician -- I definately ain't no better than anyone on this site

I should say I was a technician -- I'm slow as chiat now...LOL, but I can still get it done.

Chiller is alright -- we all are here to learn -- I know I am

Geeze, get over yourself. Why do you condesend in with the low lifes. A person with your stature and education surely wouldn't want to be seen here with the low life "technicians". Now go crawl back under your rock!!

 

[jrbenny]

Hey -- I'm a tool monkey too with feelings...lol.

Once a technician, always a technician -- I definately ain't no better than anyone on this site

I should say I was a technician -- I'm slow as chiat now...LOL, but I can still get it done.

Chiller is alright -- we all are here to learn -- I know I am

Several of your posts portray a completely different attitude. Might think before hitting Post Reply in the future.

 

[The Penguin]

boy some of you guys woops! big shot CHILLER techs sure have your collective panties in a bunch.

for gods sakes there is no glamour in punching tubes

they are just machines get over it and your selves

the way you guys are carrying on about your selves - i'm surprised you can get your swelled chiller tech heads in through the door ways into the holy chiller room to pray at the chiller altar.


As far as I am concerned all chillers should come with the full service manual to be kept on site - at the building OWNERS risk.

yes all aspiring techs should get to go to chiller school and then be mentored by a seasoned chiller tech for a while. but in the real world .....

I wonder if some of you big shot chiller techs want it all kept a seceret and a mystery so that others are excluded,shut out through lack of available infomation - just like the DDC guys and companies