[skwsproul]

Ya, its stupid. They just lock themselves out of selling hardware.

Distech/Voyant cross all branding lines. Plus its good stuff. Win Win!

How did he smoke any controllers doing that?

We recently did a job with Distech and Honeywell. Honeywell did not have the controller that we needed for parts of the job, we are a Honeywell company so of course we used it where we could. Anyhow integrated it with a webs 403 and it worked pretty good I must say. I did like the Distech it was a first for us and you know how fun that can be but all is good.

 

[willf650]

I think the WEBS wizards are restricted to only work with the WEBS tools.

I have the wizards on a straight Vykon jace and they work.

 

[ddcfreek]

I have the wizards on a straight Vykon jace and they work.

I have used them on Vykon as well, I even got FX40 stations to run on WEBs software on my computer. I don't think it would run on a Jace because I think it needs the jci .dist file or the right appliance files.

I don't think I have Hutchey's wizards, what are they?

 

[asdf;ljk]

I have used them on Vykon as well, I even got FX40 stations to run on WEBs software on my computer. I don't think it would run on a Jace because I think it needs the jci .dist file or the right appliance files.

I don't think I have Hutchey's wizards, what are they?

If the WEBSAX wizards are truly unrestricted, then they should run on the FX. FX doesn't place any restrictions on their licensing. They might be restricted to only WEBS and Vykon. My FX license file is all wildcards:

accept.station.in="*" accept.station.out="*" accept.wb.in="*" accept.wb.out="*"/>

 

[ddcfreek]

If the WEBSAX wizards are truly unrestricted, then they should run on the FX. FX doesn't place any restrictions on their licensing. They might be restricted to only WEBS and Vykon. My FX license file is all wildcards:

accept.station.in="*" accept.station.out="*" accept.wb.in="*" accept.wb.out="*"/>

Then it may just need the one of the Honeywell .jar files to run. All FX's are open? Interesting...

 

[Chris_Worthington]

The HW Wizards will only work on the HW & Vykon "Branded" Jaces.

It has nothing to do with NIC statement, it checks the "Brand"

 

[skwsproul]

I have used them on Vykon as well, I even got FX40 stations to run on WEBs software on my computer. I don't think it would run on a Jace because I think it needs the jci .dist file or the right appliance files.

I don't think I have Hutchey's wizards, what are they?

One of the guys, I belive at Honeywell wrote some wizards included px views for the individual HW controllers we have used some of them they work really well. I will see if I can get a link to them. I believe that they might be available through the Tridium forums.