honeywell and niagara?

 

Vykon default is, tridium:niagara for an embedded Jace

Windows based (supervisor, soft jace) would be your windows admin login

Do a serial connection and change it back to this default.

Kevin

 

That's what I thought but it doesn't work. They must have changed it.

 

Do you know how to reset the password and unlock it?
I am not going to post it but if you dont I can email you.

 

Lost Vykon login



If you have the info to get into a vykon Jace the previous contractor did not leave the login creds.

 

It's probably somewhere I can did up. I'll have them contact the installer and try to get it first. Thanks

 

It is recommended that you change the default user name and password when you commission a Jace. It makes it a pain in the a.ss but it is recommended. There are programs out there that can search for platform IP using key words and if defaults are left as is then unwanteds, is that a word, can cause havoc.

 

Probably should make it unique per site also. Some prick like me might get access to it and suck out the password you use everywhere.

 

Same guy different jace. I've got a jace that where the platform defaults were changed and I can log in because my login 'remembers' the password but I don't have it. I can get into the jace but how can I reveal the password? Seems like if I log in I should be able to unhide the password.

 

How bad do want it?

On at least a J2, J6 and 403s you can pull out eeprom and its stored in plan text. Of course you need a reader and an adapter for PLCC32.

 

I totally want to do this. It is the thrill of going where I am not supposed to go.... usefulness be darned!

 

Sounds serious. I just went ahead and changed it so we'll go from here. Thanks.

 

Exactly, its the road less traveled...