HVAC-Talk: Heating, Air & Refrigeration Discussion banner

Prime mini split

1 reading
1.2K views 8 replies 4 participants last post by  dougfamous  
#1 ·
I just finished installing a prime 36000 btu mini split. The unit comes on, displays the current temperature, then blinks PP three or four times and shuts off. Any ideas?
 
#5 ·
Your technician should be the one doing the diagnosis.
If this is something you are doing yourself, we won’t be able to offer any advice because site rules prohibit us from engaging in DIY support.
 
Save
#8 ·
Yes. However, our hands are tied.
It is regrettable that retailers represent complicated and potentially hazardous HVAC installations as a simple DIY task. There’s a lot that can go wrong.
 
Save
#9 ·
These kind of posts amaze me. You've given us no usable information, even if we were allowed to help you we couldn't.

What's the model number of the unit?
What exact codes are you getting? Is it 3 or 4 blinks?
It makes a difference. Did you look in the manual?
Did you install it yourself? Did you use the proper flaring tool? Torque the flares to spec? Pull a vacuum? Etc.

It looks like you'll have to wait until their tech support is open and try them.
 
Save
You have insufficient privileges to reply here.