We're getting ready to replace our old Janitrol HVAC system. Here are a few photos of the builder install. Pretty much everything shown here will be replaced, including the drip pan and the crazy vent. Is there anything else I should have my HVAC contractor do when they install the new system?
Should vibration pads go on top of the cinder blocks? What about the weathered strand board under the drip pan. Should I replace that with 1/2 exterior plywood? I'm also attaching a few photos of the outside condensers. Any help and/or advice is greatly appreciated.
Attic Furnace
![]()
![]()
![]()
![]()
![]()
![]()
![]()
AC Condensors
![]()
![]()
Should vibration pads go on top of the cinder blocks? What about the weathered strand board under the drip pan. Should I replace that with 1/2 exterior plywood? I'm also attaching a few photos of the outside condensers. Any help and/or advice is greatly appreciated.
Attic Furnace
AC Condensors
