[Ingersoll AC]

Well as for the SMAN3 has a built in micron gauge so I would say no but some of the guys can chime in that have been using them for a bit...mine is still 5 weeks away (

 

[Ingersoll AC]

take a look at the asx14,stand alone

Thats not a stand alone piece its a accessory head.

 

[Ingersoll AC]

What about the HVAC Guide? Do you have any info on that?

No sorry I don't if you do a quick search on HG2 or HG3 there is some threads in regards to that unit.

 

[Ingersoll AC]

So again with the SMAN3 I need Not to buy a micron gauge? And The HVAC Guide is good for doing thru checks on a system? I guess both will work good together huh?

Correct and YES

 

[Ingersoll AC]

The SVG2 is our stand alone Micron Guage. It runs about $149.

And I have one in transit. Thanks Russell.

 

[Ingersoll AC]

Which would still be a POS @ half the price
Bought one a while back and it had an enternal leak sent it back.
When I finally got it back it still had the leak.
I just gave up and bought a Yellow Jacket

LOL really, cause a buddy of mine has two dead YJ ones in the case.

 

[Ingersoll AC]

dont use ure manifolds for a vacuum....

The SMAN3 has a actual built in vac gauge.

 

[Ingersoll AC]

I guess you can get good and bad in any product. But to have sent it back and was returned to me just as I sent it in, come on now makes me wonder about customer service. Does make for a good paper weight. I have bought a lot of Fieldpiece stuff in the past but if that is the way they stand behind their products I don't think I will buy any more. Tools cost to much to buy something that won't work.

You must not have seen how the guys here are treated in the way of customer service. And I will bet anything that had you expressed your displeasure to Fieldpiece earlier then it would have been corrected. Even with the best customer service sometime mistakes are made but they cant get fixed without telling the powers to be.