I'm working on a project with 2 Mitsubishi outdoor units, each with 2 indoor units controlled by a PAR-F27MEA remote controller. One outdoor unit is in one end of the building with an M-Net bus connecting it to its associated indoor units and PAR-F27MEA controllers. The other outdoor unit is on the opposite end of the building and operates in a similar way. Basically, there are two M-Net buses that are not connected together. I have purchased a lonworks adapter LMAP03U in an effort to convert the M-Net to LonWorks for integration with the existing BMS. I plan to connect the two M-Net buses together according to the wiring diagram provided with the Lon Adapter. My worry is that I could run into M-Net address conflicts since devices on the two M-Net buses might have been set with similar addresses. The question is, how do I change this M-Net addresses from the PAR-F27MEA remote controller?
Thanks in advance for your help...
Thanks in advance for your help...
