I have a low temp Copeland ZF48 scroll that is throwing a phase imbalance code on the protector. My voltage at peckerhead is 476,477,477
My question is how is this sensing imbalance?
I switched L2 and L3 on the module and it runs properly. I’ve also tried a diff module. Same result. I left this system down because I don’t want compressor failure.
My question is how is this sensing imbalance?
I switched L2 and L3 on the module and it runs properly. I’ve also tried a diff module. Same result. I left this system down because I don’t want compressor failure.
