Just pulled the unit in, it's a newer model and has the bacnet module on it. I can see the device just fine but discovery fails. I can discover points on all the other controllers on the network. The only settings I see from the HMI are basic config, ie baud rate, device instance, etc. Why won't she talk to me?
![Image]()
Mikemikemike
Daikin Trailblazer is visible over bacnet, can't discover points?
Just pulled the unit in, it's a newer model and has the bacnet module on it. I can see the device just fine but discovery fails. I can discover points on all the other controllers on the network. The only settings I see from the HMI are basic config, ie baud rate, device instance, etc. Why won't she talk to me?
![Image]()
Your a trail blazer! Certainly you didn't expect to walk down a meticulous maintained and insect free paved path?
Marketing may have came up with an appropriate name here lol.
Marketing may have came up with an appropriate name here lol.
Just from past experiences with Daikin issues like this I would get intouch with tech support and get the latest firmware assuming this is a MicroTech controller. Had this similiar issue with some new AGZ Daikin chillers and it was the firmware.
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
