Haven't done much beyond reading the cut sheets on Secure Connect, but I'm curious to know if it's possible to run an SC node on a Jace and then use an offsite workbench station as a hub. First thing I noted was that they say a hub ought not be exposed to the WAN because it listens to incoming requests. So maybe the dream is dead in the water before we get much farther, but if all we're talking about is hashing the bacnet traffic with a public key, there should be some configuration that lets you send and receive the bacnet data across the wide open net. Jace with an SC node, workbench station with the hub and a shared public key, spin up the station to diagnose and configure schedules/setpoints/etc, and kill it when you're done tinkering. I know it won't allow you to make niagara-level changes, ie, it won't allow you to configure your Jace or make changes to the onsite station, but if you're just checking on a unit or grabbing trends, that seems like it should work.
Anyway who's messed with it so far?
Anyway who's messed with it so far?
