I'm looking to find and use these when taking apart txv valves, the standard jaws on a 12" is too thick on some txv's and pushes in the inlet or outlet pipes.
Thanks
Thanks
Adjustable wrench with skinny jaws
mason
1 - 14 of 14 Posts
Joined
·
458 Posts
Heres a great adjustable wrench.
Thin and opens very wide for its size.One of my fav tool in my bag.
http://toolguyd.com/channellocks-wide-adjustable-wrenches/
Thin and opens very wide for its size.One of my fav tool in my bag.
http://toolguyd.com/channellocks-wide-adjustable-wrenches/
Looks like a good design, these fit the txv heads with out hitting the body or lines?
Channel lock brand adjustable wrenches are actually manufactured by Irega and are the best IMO.
http://chadstoolbox.com/irega-adjustable-wrench.aspx
Joined
·
18,975 Posts
Joined
·
1,959 Posts
I CAN'T be the only one deeply disturbed by this conversation...
![]()
:ditto:
Some txv's are harder to break loose than others, more inches= more leverage, I agree on the jaw width which is why I would like one that doesn't compromise leverage for width.
Joined
·
18 Posts
They make four sizes now the short one with big jaws works great for txv's
Joined
·
4,376 Posts
I use my German pliers ... Aka as knipex! They fit perfectly
Sent from my HTC Sensation 4G using Tapatalk 2
Sent from my HTC Sensation 4G using Tapatalk 2
Joined
·
31 Posts
Try this bahco wrench
http://www.amazon.com/gp/aw/d/B0012Y2EUC
It is 8", opens as wide as a 12" and has very narrow jaws and is machined perfectly. It's my favorite adjustable
http://www.amazon.com/gp/aw/d/B0012Y2EUC
It is 8", opens as wide as a 12" and has very narrow jaws and is machined perfectly. It's my favorite adjustable
1 - 14 of 14 Posts
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
